Projecten van klanten

At PoseidonDeck, we believe your deck should work as hard as you do—through sun, spray, salt, and every step in between. That’s why our EVA foam boat flooring is crafted for real conditions and real life on the water. Whether you're cruising with family, fishing at dawn, or relaxing barefoot under the sun, our non-slip, waterproof, and UV-resistant flooring delivers the comfort, durability, and style you need.

Waarom PoseidonDeck?

Overzicht

EVA-schuim bootvloer – gegroefde camouflage

Maritiem EVA-schuim met gesloten cellen, 6 mm dik, voor een verend oppervlak op geschikte dekdelen.

Kies de beschikbare kleur, afmetingen en kleeflaag op de productpagina. Meet elk dekdeel en houd rekening met snijverlies. Dit zijn universele doe-het-zelfplaten, geen voorgesneden set voor een specifiek bootmodel.

Zelf plaatsen: meten, snijden en plakken

Reinig, ontvet en droog een gladde, stabiele ondergrond volledig. Maak een sjabloon, snijd met een scherp mes en pas de delen droog. Verwijder de beschermfolie geleidelijk en druk vanuit het midden naar de randen stevig aan.

Specificaties en afmetingen

Afmetingen: bekijk de beschikbare formaten in de keuzelijst

240.0 × 39.9 cm (94.5″ × 15.7″) · 240.0 × 59.9 cm (94.5″ × 23.6″) · 240.0 × 89.9 cm (94.5″ × 35.4″) · 240.0 × 117.3 cm (94.5″ × 46.2″)

Voor geschikte delen van visboten, pontons, kajaks en zwemplatforms. Controleer ondergrond en hechting vóór montage.

Veelgestelde vragen

Is dit een voorgesneden set?

Kies de beschikbare kleur, afmetingen en kleeflaag op de productpagina. Meet elk dekdeel en houd rekening met snijverlies. Dit zijn universele doe-het-zelfplaten, geen voorgesneden set voor een specifiek bootmodel.

Welke kleeflaag kies ik?

Kies de aangeboden PoseidonDeck- of 3M-optie. De beschikbare lijmsoort en de voorbereiding van de ondergrond bepalen de keuze; lijm compenseert geen natte, vuile of onstabiele ondergrond.

2 pack

De optie ‘2 pack’, indien beschikbaar, bevat twee identieke platen van elk 94,5 × 46,2 inch, ongeveer 240 × 117 cm per plaat. De maten gelden per plaat, niet voor één extra grote plaat. Houd rekening met snijverlies en patroonrichting.

Spoel met zoet water en reinig met milde zeep. Vermijd agressieve middelen en hogedrukreiniging. Donkere kleuren kunnen warm worden in de zon.

Montagehandleiding en advies

Overzicht

Maritieme EVA-platen van 6 mm om zelf op maat te snijden voor uw bootdek.

Materiaal

Maritiem EVA-schuim met gesloten cellen, 6 mm dik, voor een verend oppervlak op geschikte dekdelen.

Grip op een nat dek

Geslotencellig schuim is waterbestendig. UV-straling, hitte en onderhoud beïnvloeden uiterlijk en levensduur. Vermijd langdurige geconcentreerde hitte.

Eenvoudig snijden en plaatsen

Reinig, ontvet en droog een gladde, stabiele ondergrond volledig. Maak een sjabloon, snijd met een scherp mes en pas de delen droog. Verwijder de beschermfolie geleidelijk en druk vanuit het midden naar de randen stevig aan.

Eenvoudig onderhoud

Spoel met zoet water en reinig met milde zeep. Vermijd agressieve middelen en hogedrukreiniging. Donkere kleuren kunnen warm worden in de zon.

Specificaties en afmetingen

Materiaal

Maritiem EVA-schuim met gesloten cellen, 6 mm dik, voor een verend oppervlak op geschikte dekdelen.

Specificaties en afmetingen

Afmetingen: bekijk de beschikbare formaten in de keuzelijst

240 × 40 cm (94.5″ × 15.7″) · 240 × 60 cm (94.5″ × 23.6″) · 240 × 90 cm (94.5″ × 35.4″) · 240 × 117 cm (94.5″ × 46.2″)

Eigenschappen en onderhoud

De levensduur hangt af van gebruik, zonlicht, ondergrondvoorbereiding en onderhoud. De beperkte garantie van twee jaar kent voorwaarden en garandeert geen vaste levensduur.

Patronen en kleuren

Teaklook met groeven, diamantprofiel, gegroefde camouflage, camouflagediamant en effen kleuren. Bekijk elk product voor beschikbare opties.

Inhoud van de verpakking

  • teaklook en groeven

  • diamantprofiel

  • Grooved

  • effen kleuren

  • Camo

Veelgestelde vragen

Wat is EVA-schuim bootvloer?

Maritiem EVA-schuim met gesloten cellen vormt een verend dekoppervlak. Universele platen snijdt u volgens uw eigen sjabloon op maat.

Waarom kiezen voor EVA-platen op uw boot?

Met de platen kunt u zelf afzonderlijke dekdelen vernieuwen en een passend patroon, kleur en kleeflaag kiezen.

Is EVA bestand tegen water en zonlicht?

Geslotencellig schuim is waterbestendig. UV-straling, hitte en onderhoud beïnvloeden uiterlijk en levensduur. Vermijd langdurige geconcentreerde hitte.

Hoe plaats ik EVA-bootvloerplaten?

Reinig, ontvet en droog een gladde, stabiele ondergrond volledig. Maak een sjabloon, snijd met een scherp mes en pas de delen droog. Verwijder de beschermfolie geleidelijk en druk vanuit het midden naar de randen stevig aan.

Hoe reinig ik EVA-bootvloeren?

Spoel met zoet water en reinig met milde zeep. Vermijd agressieve middelen en hogedrukreiniging. Donkere kleuren kunnen warm worden in de zon.

Welke patronen en kleuren zijn verkrijgbaar?

Teaklook met groeven, diamantprofiel, gegroefde camouflage, camouflagediamant en effen kleuren. Bekijk elk product voor beschikbare opties.

Hoe lang gaat EVA-bootvloer mee?

De levensduur hangt af van gebruik, zonlicht, ondergrondvoorbereiding en onderhoud. De beperkte garantie van twee jaar kent voorwaarden en garandeert geen vaste levensduur.

  • 5 stars: 1395 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
K
Kevin Butler
3M Eva Foam Boat Decking Aluminum Pontoon Boat Decking

Having tried MarineMat in the past, I find this waterproof material to provide better shock absorbing and value. It was simple to hose it off and the eva foam bass boat flooring ensures it stays put even when the deck is wet. It was simple to clean and the boat floor ensures it stays put even when the deck is wet. I installed this best flooring for boats on my camper steps and appreciate how the camouflage boat flooring delivers a shock absorbing underfoot. The foam marine decking offers a durable surface that is fake teak decking and boat flooring near me even under harsh sun.

J
James
Great choice high quality material and sticks great

Great material and sticks really good make sure to have a good cut out ready to be installed before you start it will stick and not come up very easy

J
James
Great choice high quality material and sticks great

Great material and sticks really good make sure to have a good cut out ready to be installed before you start it will stick and not come up very easy

S
Seth Hutchens
Not just for boats.

Love this product, easy to use and has a lot more applications then just for a boat. I have used it on my bronco and a cooler that I keep in the back when I have the top off. Keep the lid of it much cooler. You can cut with a mat knife or scissors, the glue holds up in direct sunlight without any issues, and the material does not tear easily. Has lots of options for patterns and colors, and matched my bronco color better than I thought. I used it to protect the paint on my back door and the D pillar, and looks amazing while doing it.

S
Seth Hutchens
Not just for boats.

Love this product, easy to use and has a lot more applications then just for a boat. I have used it on my bronco and a cooler that I keep in the back when I have the top off. Keep the lid of it much cooler. You can cut with a mat knife or scissors, the glue holds up in direct sunlight without any issues, and the material does not tear easily. Has lots of options for patterns and colors, and matched my bronco color better than I thought. I used it to protect the paint on my back door and the D pillar, and looks amazing while doing it.

S
S
Would purchase again

Chose this to freshen up a Grizzly 1448 and we are super happy with it so far. Put it in 3 months ago and its rock solid. We took care to properly prep the surfaces with sanding and cleaning with acetone before applying the Eva. Feels like a new boat.

S
S
Would purchase again

Chose this to freshen up a Grizzly 1448 and we are super happy with it so far. Put it in 3 months ago and its rock solid. We took care to properly prep the surfaces with sanding and cleaning with acetone before applying the Eva. Feels like a new boat.

S
Sebastian Greenholtz
Solid But Flexible Foam for Waterproof Covering

Let me start off by saying I got this boat flooring foam not to actually put on a boat, but as part of my window AC weatherizing strategy. The elegant gray foam has a generous thickness while still being flexible enough to conform to the outside of my window, and the sticky backing holds the foam in place without any extra security needed. We have had several torrential rain storms already this summer but this foam flooring has kept the inside of my house completely dry. I used utility scissors to cut the foam to size - it's a bit too thick for regular scissors - but the backing comes off easily and the roll goes much further than I thought it would. This will definitely be a recurring tool in my AC weatherizing toolkit.

S
Sebastian Greenholtz
Solid But Flexible Foam for Waterproof Covering

Let me start off by saying I got this boat flooring foam not to actually put on a boat, but as part of my window AC weatherizing strategy. The elegant gray foam has a generous thickness while still being flexible enough to conform to the outside of my window, and the sticky backing holds the foam in place without any extra security needed. We have had several torrential rain storms already this summer but this foam flooring has kept the inside of my house completely dry. I used utility scissors to cut the foam to size - it's a bit too thick for regular scissors - but the backing comes off easily and the roll goes much further than I thought it would. This will definitely be a recurring tool in my AC weatherizing toolkit.

A
Alex
Great Product for the Price very happy

Why did you pick this product vs others?:This Is great stuff nice to work with. A+++nice up Grade

A
Alex
Great Product for the Price very happy

Why did you pick this product vs others?:This Is great stuff nice to work with. A+++nice up Grade

C
Charles Parker
Works great on my Hobie Cat!

Bought this to cover the side rails of my Hobie Cat 16 (and atop the stern of the hulls behind the trampoline). Much more economical than the rail kits, you get much more material and more varieties are available than the kits. Nice grip in the water. Seems just as durable as other neoprene kits (you want soft, and supple for grip rather than firm for durability) ... Only issue is that in this case where it is applied to a curved surface, some of the edges benefit from a touch of additional contact cement to ensure they don't lift (Interestingly I wrapped from the top of the rail -- starting at the edge of the trampoline -- and that edge adhered well from the start, but as it wrapped around the rail, the bottom was the edge that seemed to benefit from additional adhesive ... maybe because it didn't benefit from warming in the sun as much.)

D
Dale fahrni
Worth the money

Looks very nice . And easy to use. Sticks well

C
Charles Parker
Works great on my Hobie Cat!

Bought this to cover the side rails of my Hobie Cat 16 (and atop the stern of the hulls behind the trampoline). Much more economical than the rail kits, you get much more material and more varieties are available than the kits. Nice grip in the water. Seems just as durable as other neoprene kits (you want soft, and supple for grip rather than firm for durability) ... Only issue is that in this case where it is applied to a curved surface, some of the edges benefit from a touch of additional contact cement to ensure they don't lift (Interestingly I wrapped from the top of the rail -- starting at the edge of the trampoline -- and that edge adhered well from the start, but as it wrapped around the rail, the bottom was the edge that seemed to benefit from additional adhesive ... maybe because it didn't benefit from warming in the sun as much.)

D
Dale fahrni
Worth the money

Looks very nice . And easy to use. Sticks well

G
Gm
Great quality marine foam pad with super clear instructions !

I got this for my small fishing boat to replace the old, worn-out carpet, and honestly I am impressed. The foam feels durable but soft underfoot, perfect for barefoot days out on the lake. Its also not slippery when wet, which is a big plus when I am reeling in a catch or the kids are climbing in and out with wet feet.One thing that really stood out was how detailed and user-friendly the instructions were. Its not just a list of steps-they actually walk you through surface prep, cutting tips, and even how to re-stick it if it ever starts peeling. The tips about not using it near fuel tanks or on uneven surfaces were really helpful and felt like advice from someone whos actually used this stuff on a real boat.Cutting and laying it took about an hour for our deck(I used a utility knife and a long metal ruler), and the backing peeled off clean. The adhesive was strong right away, but the manual says to wait 24 hours to let it fully bond- and I followed that just to be safe. Its been a few weeks now and its still holding up perfectly, even through some rainy afternoons and muddy shoes.

M
Manila Mike
Totally Impressed

We took our Carin Terrier, Phoebe, out for her first kayak a couple weeks ago. She really enjoyed sitting on the front deck where she could see everything. That is until her claws lost traction on the plastic and she took a plunge in the lake. From then on, she has insisted on being a lap dog. So I ordered this boat flooring to make a pup perch that she could grip more easily. The color matched my kayak perfectly. I made the surface of the platform out of used plywood that I had around. I sanded it a bit and blew it off with an air compressor before I stuck down the EVA foam flooring. It seemed to really adhere well. Since my dog platform was about 21 inches wide and the EVA foam was 16 inches, I had to splice on an additional width from the length I cut off. The flooring is designed to do this (meaning it had a groove on the one edge that would match with the ridge on the opposite edge). It looks great from a distance but careful examination shows that the joint is not perfect. I used a

Black & Decker rotary cutter



to trim the edges of the foam flush with the edge of the plywood after it was stuck down. This worked great and made the job so much quicker and easier than trying to use some sort of blade. This foam will be so much safer and more comfortable for Phoebe to enjoy her next kayak ride.