お客様の施工例

At PoseidonDeck, we believe your deck should work as hard as you do—through sun, spray, salt, and every step in between. That’s why our EVA foam boat flooring is crafted for real conditions and real life on the water. Whether you're cruising with family, fishing at dawn, or relaxing barefoot under the sun, our non-slip, waterproof, and UV-resistant flooring delivers the comfort, durability, and style you need.

PoseidonDeckが選ばれる理由

概要

ボート用EVAデッキマット – 迷彩ストライプ溝

厚さ6mmの独立気泡マリン用EVAフォーム。適したデッキ面にクッション性を加えます。

商品ページで色・サイズ・裏面粘着材をお選びください。各施工箇所を採寸し、カット分の余裕を確保してください。汎用フリーカットシートであり、特定の艇種向けにカット済みのキットではありません。

DIY施工:採寸・カット・貼り付け

平滑で安定した下地を清掃・脱脂し、完全に乾かしてください。型紙を作り、鋭利なカッターで切って仮合わせします。裏紙を少しずつ剥がし、中央から外側へローラーなどでしっかり圧着してください。

仕様・サイズ

サイズ:選択欄で購入可能な寸法をご確認ください

240.0 × 39.9 cm (94.5″ × 15.7″) · 240.0 × 59.9 cm (94.5″ × 23.6″) · 240.0 × 89.9 cm (94.5″ × 35.4″) · 240.0 × 117.3 cm (94.5″ × 46.2″)

釣り船、ポンツーン、カヤック、スイムプラットフォームなどの適した箇所に。施工前に下地との相性と接着を確認してください。

よくある質問

艇種別にカット済みのキットですか?

商品ページで色・サイズ・裏面粘着材をお選びください。各施工箇所を採寸し、カット分の余裕を確保してください。汎用フリーカットシートであり、特定の艇種向けにカット済みのキットではありません。

裏面粘着材はどう選びますか?

商品ページにあるPoseidonDeckまたは3M仕様をお選びください。粘着材の種類と下地処理が大切です。濡れ、汚れ、不安定な下地を粘着材で補うことはできません。

2 pack

「2 pack」仕様がある場合、同じ色・柄・粘着材のシートが2枚入ります。1枚あたり94.5 × 46.2インチ、約240 × 117cmです。寸法は各シートのサイズであり、1枚の巨大なシートではありません。カットの余白と柄の方向を考慮してください。

真水と中性洗剤でお手入れしてください。強い薬剤や高圧洗浄は避けてください。濃色は直射日光で熱くなることがあります。

施工ガイド・選び方

概要

船のデッキをDIYで張り替えるための、厚さ6mmのマリン用EVAシートです。必要な形にカットして施工できます。

素材

厚さ6mmの独立気泡マリン用EVAフォーム。適したデッキ面にクッション性を加えます。

濡れたデッキでのグリップ

独立気泡フォームは耐水性があります。紫外線、熱、お手入れにより外観や寿命が変わります。熱が集中する場所での長時間の使用は避けてください。

カット・施工が簡単

平滑で安定した下地を清掃・脱脂し、完全に乾かしてください。型紙を作り、鋭利なカッターで切って仮合わせします。裏紙を少しずつ剥がし、中央から外側へローラーなどでしっかり圧着してください。

お手入れ

真水と中性洗剤でお手入れしてください。強い薬剤や高圧洗浄は避けてください。濃色は直射日光で熱くなることがあります。

仕様・サイズ

素材

厚さ6mmの独立気泡マリン用EVAフォーム。適したデッキ面にクッション性を加えます。

仕様・サイズ

サイズ:選択欄で購入可能な寸法をご確認ください

240 × 40 cm (94.5″ × 15.7″) · 240 × 60 cm (94.5″ × 23.6″) · 240 × 90 cm (94.5″ × 35.4″) · 240 × 117 cm (94.5″ × 46.2″)

特性・お手入れ

使用頻度、日光、下地処理、お手入れに左右されます。適用条件のある2年間の限定保証であり、一定の耐用年数を保証するものではありません。

柄・カラー

人工チーク溝、ダイヤ、迷彩溝、迷彩ダイヤ、無地などがあります。購入可能な仕様は各商品ページでご確認ください。

同梱内容

  • 人工チーク・ストライプ溝

  • ダイヤ柄

  • Grooved

  • 無地

  • Camo

よくある質問

ボート用EVAデッキマットとは何ですか?

独立気泡のマリン用EVAフォームでデッキにクッション性を加えるシートです。汎用品はご自身の型紙に合わせてカットします。

ボートの張り替えにEVAシートを選ぶ理由は?

デッキの必要な箇所をDIYで張り替え、用途に合わせて柄・色・粘着材を選べます。

EVAは水や日光に強いですか?

独立気泡フォームは耐水性があります。紫外線、熱、お手入れにより外観や寿命が変わります。熱が集中する場所での長時間の使用は避けてください。

EVAデッキマットの施工方法は?

平滑で安定した下地を清掃・脱脂し、完全に乾かしてください。型紙を作り、鋭利なカッターで切って仮合わせします。裏紙を少しずつ剥がし、中央から外側へローラーなどでしっかり圧着してください。

EVAデッキマットのお手入れ方法は?

真水と中性洗剤でお手入れしてください。強い薬剤や高圧洗浄は避けてください。濃色は直射日光で熱くなることがあります。

どのような柄や色がありますか?

人工チーク溝、ダイヤ、迷彩溝、迷彩ダイヤ、無地などがあります。購入可能な仕様は各商品ページでご確認ください。

船で使用した場合の耐用年数は?

使用頻度、日光、下地処理、お手入れに左右されます。適用条件のある2年間の限定保証であり、一定の耐用年数を保証するものではありません。

  • 5 stars: 1395 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
K
Kevin Butler
3M Eva Foam Boat Decking Aluminum Pontoon Boat Decking

Having tried MarineMat in the past, I find this waterproof material to provide better shock absorbing and value. It was simple to hose it off and the eva foam bass boat flooring ensures it stays put even when the deck is wet. It was simple to clean and the boat floor ensures it stays put even when the deck is wet. I installed this best flooring for boats on my camper steps and appreciate how the camouflage boat flooring delivers a shock absorbing underfoot. The foam marine decking offers a durable surface that is fake teak decking and boat flooring near me even under harsh sun.

J
James
Great choice high quality material and sticks great

Great material and sticks really good make sure to have a good cut out ready to be installed before you start it will stick and not come up very easy

J
James
Great choice high quality material and sticks great

Great material and sticks really good make sure to have a good cut out ready to be installed before you start it will stick and not come up very easy

S
Seth Hutchens
Not just for boats.

Love this product, easy to use and has a lot more applications then just for a boat. I have used it on my bronco and a cooler that I keep in the back when I have the top off. Keep the lid of it much cooler. You can cut with a mat knife or scissors, the glue holds up in direct sunlight without any issues, and the material does not tear easily. Has lots of options for patterns and colors, and matched my bronco color better than I thought. I used it to protect the paint on my back door and the D pillar, and looks amazing while doing it.

S
Seth Hutchens
Not just for boats.

Love this product, easy to use and has a lot more applications then just for a boat. I have used it on my bronco and a cooler that I keep in the back when I have the top off. Keep the lid of it much cooler. You can cut with a mat knife or scissors, the glue holds up in direct sunlight without any issues, and the material does not tear easily. Has lots of options for patterns and colors, and matched my bronco color better than I thought. I used it to protect the paint on my back door and the D pillar, and looks amazing while doing it.

S
S
Would purchase again

Chose this to freshen up a Grizzly 1448 and we are super happy with it so far. Put it in 3 months ago and its rock solid. We took care to properly prep the surfaces with sanding and cleaning with acetone before applying the Eva. Feels like a new boat.

S
S
Would purchase again

Chose this to freshen up a Grizzly 1448 and we are super happy with it so far. Put it in 3 months ago and its rock solid. We took care to properly prep the surfaces with sanding and cleaning with acetone before applying the Eva. Feels like a new boat.

S
Sebastian Greenholtz
Solid But Flexible Foam for Waterproof Covering

Let me start off by saying I got this boat flooring foam not to actually put on a boat, but as part of my window AC weatherizing strategy. The elegant gray foam has a generous thickness while still being flexible enough to conform to the outside of my window, and the sticky backing holds the foam in place without any extra security needed. We have had several torrential rain storms already this summer but this foam flooring has kept the inside of my house completely dry. I used utility scissors to cut the foam to size - it's a bit too thick for regular scissors - but the backing comes off easily and the roll goes much further than I thought it would. This will definitely be a recurring tool in my AC weatherizing toolkit.

S
Sebastian Greenholtz
Solid But Flexible Foam for Waterproof Covering

Let me start off by saying I got this boat flooring foam not to actually put on a boat, but as part of my window AC weatherizing strategy. The elegant gray foam has a generous thickness while still being flexible enough to conform to the outside of my window, and the sticky backing holds the foam in place without any extra security needed. We have had several torrential rain storms already this summer but this foam flooring has kept the inside of my house completely dry. I used utility scissors to cut the foam to size - it's a bit too thick for regular scissors - but the backing comes off easily and the roll goes much further than I thought it would. This will definitely be a recurring tool in my AC weatherizing toolkit.

A
Alex
Great Product for the Price very happy

Why did you pick this product vs others?:This Is great stuff nice to work with. A+++nice up Grade

A
Alex
Great Product for the Price very happy

Why did you pick this product vs others?:This Is great stuff nice to work with. A+++nice up Grade

C
Charles Parker
Works great on my Hobie Cat!

Bought this to cover the side rails of my Hobie Cat 16 (and atop the stern of the hulls behind the trampoline). Much more economical than the rail kits, you get much more material and more varieties are available than the kits. Nice grip in the water. Seems just as durable as other neoprene kits (you want soft, and supple for grip rather than firm for durability) ... Only issue is that in this case where it is applied to a curved surface, some of the edges benefit from a touch of additional contact cement to ensure they don't lift (Interestingly I wrapped from the top of the rail -- starting at the edge of the trampoline -- and that edge adhered well from the start, but as it wrapped around the rail, the bottom was the edge that seemed to benefit from additional adhesive ... maybe because it didn't benefit from warming in the sun as much.)

D
Dale fahrni
Worth the money

Looks very nice . And easy to use. Sticks well

C
Charles Parker
Works great on my Hobie Cat!

Bought this to cover the side rails of my Hobie Cat 16 (and atop the stern of the hulls behind the trampoline). Much more economical than the rail kits, you get much more material and more varieties are available than the kits. Nice grip in the water. Seems just as durable as other neoprene kits (you want soft, and supple for grip rather than firm for durability) ... Only issue is that in this case where it is applied to a curved surface, some of the edges benefit from a touch of additional contact cement to ensure they don't lift (Interestingly I wrapped from the top of the rail -- starting at the edge of the trampoline -- and that edge adhered well from the start, but as it wrapped around the rail, the bottom was the edge that seemed to benefit from additional adhesive ... maybe because it didn't benefit from warming in the sun as much.)

D
Dale fahrni
Worth the money

Looks very nice . And easy to use. Sticks well

G
Gm
Great quality marine foam pad with super clear instructions !

I got this for my small fishing boat to replace the old, worn-out carpet, and honestly I am impressed. The foam feels durable but soft underfoot, perfect for barefoot days out on the lake. Its also not slippery when wet, which is a big plus when I am reeling in a catch or the kids are climbing in and out with wet feet.One thing that really stood out was how detailed and user-friendly the instructions were. Its not just a list of steps-they actually walk you through surface prep, cutting tips, and even how to re-stick it if it ever starts peeling. The tips about not using it near fuel tanks or on uneven surfaces were really helpful and felt like advice from someone whos actually used this stuff on a real boat.Cutting and laying it took about an hour for our deck(I used a utility knife and a long metal ruler), and the backing peeled off clean. The adhesive was strong right away, but the manual says to wait 24 hours to let it fully bond- and I followed that just to be safe. Its been a few weeks now and its still holding up perfectly, even through some rainy afternoons and muddy shoes.

M
Manila Mike
Totally Impressed

We took our Carin Terrier, Phoebe, out for her first kayak a couple weeks ago. She really enjoyed sitting on the front deck where she could see everything. That is until her claws lost traction on the plastic and she took a plunge in the lake. From then on, she has insisted on being a lap dog. So I ordered this boat flooring to make a pup perch that she could grip more easily. The color matched my kayak perfectly. I made the surface of the platform out of used plywood that I had around. I sanded it a bit and blew it off with an air compressor before I stuck down the EVA foam flooring. It seemed to really adhere well. Since my dog platform was about 21 inches wide and the EVA foam was 16 inches, I had to splice on an additional width from the length I cut off. The flooring is designed to do this (meaning it had a groove on the one edge that would match with the ridge on the opposite edge). It looks great from a distance but careful examination shows that the joint is not perfect. I used a

Black & Decker rotary cutter



to trim the edges of the foam flush with the edge of the plywood after it was stuck down. This worked great and made the job so much quicker and easier than trying to use some sort of blade. This foam will be so much safer and more comfortable for Phoebe to enjoy her next kayak ride.