Camo Grooved EVA Boat Flooring Sheets (6mm)

Buyer Show

At PoseidonDeck, we believe your deck should work as hard as you do—through sun, spray, salt, and every step in between. That’s why our EVA foam boat flooring is crafted for real conditions and real life on the water. Whether you're cruising with family, fishing at dawn, or relaxing barefoot under the sun, our non-slip, waterproof, and UV-resistant flooring delivers the comfort, durability, and style you need.

Why Choose PoseidonDeck

Description

Camo Grooved EVA Foam Boat Flooring is a 6 mm closed-cell EVA foam sheet for cut-to-fit DIY deck upgrades. Several camo colorways are paired with a directional grooved surface for fishing boats, jon boats, pontoons and outdoor-focused layouts.

Important: This is a universal cut-to-fit sheet, not a model-specific pre-cut flooring kit. Measure the actual installation area before selecting a size.

Material, Backing and Use

Material: 6 mm closed-cell EVA foam for cushioned, cut-to-fit marine deck covering.
Backing: Choose Self-developed Adhesive or 3M Adhesive from the available variants.
Applications: Suitable prepared areas on fishing boats, jon boats, pontoons, cockpits and swim platforms. EVA is a surface covering, not structural decking.
Surface preparation: Install on a stable, smooth, clean and fully dry substrate. Remove old carpet and adhesive residue and repair damaged or unstable surfaces first.

Sheet Sizes and Coverage

Coverage is gross material area before cutting. Select an available size, color and adhesive above; the displayed price updates for that exact combination.

Camo Grooved EVA Foam Boat Flooring: sheet size and coverage
Sheet size	One sheet	Two sheets
94.5 × 15.7 in	10.30 sq ft	20.61 sq ft
94.5 × 23.6 in	15.49 sq ft	30.98 sq ft
94.5 × 35.4 in	23.23 sq ft	46.46 sq ft
94.5 × 46.2 in	30.32 sq ft	60.64 sq ft

94.5 × 46.2 in Two-Pack Option

Select 94.5''x46.2''(2 pack) to receive two matching sheets, each measuring 94.5 × 46.2 inches and 6 mm thick, in the selected color, pattern and adhesive option. The dimensions refer to each sheet, not one oversized sheet. One two-pack added to the cart contains two sheets.

The two sheets provide approximately 60.6 sq ft (5.63 m²) of total material before cutting. Allow for trimming, groove direction and offcuts when measuring your deck; usable coverage depends on your layout. These are universal DIY cut-to-fit sheets, not a pre-cut kit for a specific boat model.

Planning and Installation

Measure each deck section and create paper or cardboard templates.
Plan seams, pattern direction, hatches, drains and service access. Allow for offcuts; total deck area alone does not determine sheet quantity.
Cut with a sharp utility knife and dry-fit every panel before peeling the liner.
Peel the liner gradually, align without stretching and press firmly across the full panel, seams and edges.

Do not assume the adhesive will bond reliably to raised non-skid or diamond plate. Send photos to PoseidonDeck support if surface compatibility is uncertain. Follow our installation guide and sheet quantity and layout guide.

Care and Ordering Questions

Cleaning: Rinse with fresh water; use mild soap and a soft cloth or brush when needed. Avoid solvents, harsh chemicals and concentrated high-pressure washing at seams and edges.

Grip and temperature: Traction varies with water, dirt, footwear and contaminants. Color, sunlight, installation, use and care affect surface temperature and appearance.

Color checks: Screens and lighting can change color appearance. Choose the smallest available sheet to evaluate the real material before a larger order; separate free sample swatches are not currently offered.

Shipping and returns: Check destination-specific shipping methods and estimates at checkout. Review our Shipping Policy and Refund Policy before ordering. Non-quality returns, exchanges and refunds are generally not accepted. Report damage, wrong items or missing contents within 7 calendar days of carrier-confirmed delivery and before altering the product.

Compare DIY EVA boat flooring sheets, read our boat flooring care and installation considerations, or contact us for help planning your deck.

Marine EVA Foam Specifications

PoseidonDeck DIY sheet specifications
Material	6 mm closed-cell marine-grade EVA foam
Density	160–180 kg/m³
Hardness	60–65 Shore C
UV resistance	3,000+ hours
Temperature range	−30°C to 110°C
Backing	Self-developed Adhesive or genuine 3M adhesive, as selected
Wide-sheet coverage	94.5 × 46.2 in: 30.32 sq ft per sheet; two-pack: 60.64 sq ft before trimming

Contiguous US shipping: Free standard shipping at $150 after discounts (12–20 business days after dispatch); free air shipping upgrade at $370 (7–15 business days after dispatch). Alaska and Hawaii: $50 shipping, 15–25 business days. Custom orders use separate shipping rates. In-stock orders normally dispatch within 1–3 business days.

Quantity savings: 2 eligible cart items save 5%; 3+ save 10%. One two-pack contains two sheets but counts as one cart item for quantity discounts.

Shipping policy · Measure your deck and plan sheet quantity

Upgrade Your Boat

If you are considering replacing your boat flooring and don't want to spend too much? Our eva teak-like boat floor decking may be the perfect choice for you. It will give your boat a new look, make it look more luxurious. We have a variety of colors and sizes to choose. Take a minute and it may meet your needs

High Quality Materials

Our boat decking floor uses a high quality marine grade EVA foam material, not easily absorbing water. It is not easy to become hot in the sunlight, and it will not burn your feet when you stand on it with bare feet. The 6mm thickness provides a cushion and the fine pile surface provides a comfortable touch for your feet without having to put up with the hard surfaces of metal.

Excellent Slip Resistance

Crafted with scrunchies for a more textured look. The non-slip surface gives you a good grip on the boat. No need to worry about wet feet making you fall. Even it provides great grip for your pets. Let them come and go wherever they need a non-slip grip.

Easy to Cut and Install

The eva flooring is easily cut with a razor blade or scissors into the shape you want to fit nearly any surface on a boat where non-skid or protection for the boat's surface is required. It has a strong self-adhesive backing that sticks well to the surfaces.

Easy to Clean

The foam imitation teak boat deck hardware mat can be easily cleaned with broom or vacuum cleaner, or be pressure washed. It has wide applications such as boat deck floor, yacht floor, pontoon deck floor, RV flooring, swimming pool platform floor and etc. If you have other size or other needs, we can provide customized services.

Spec&Size

Material

Foam Type

Closed-cell marine-grade EVA foam
PVC-free and eco-friendly formulation

Adhesive

High-bond peel-and-stick backing
Waterproof, UV-resistant, anti-slip grip

Dimensions

Standard Roll Size

94.5'' x 47.2'' (2400mm x 1200mm)

Optional Widths

94.5'' x 15.7''
94.5'' x 23.6''
94.5'' x 35.4''

Thickness Options

Standard: 6mm (2.8kg per roll)
Optional: 8mm & 10mm (customizable)

Performance

Hardness Range

50–55° Shore C
57–63° Shore C
60–65° Shore C

Density Levels

130–140 kg/m³
160–180 kg/m³

Temperature Resistance

-30°C to 110°C
Stable under sun exposure & saltwater environments

Pattern & Color Options

Surface Textures

Faux Teak, Diamond, Stripe, Camo, Solid Brush

Colorways

40+ color combinations
Custom engraving available (CNC & laser)

Included in the Box

Stripe
Diamond
Grooved
Solid
Camo

FAQs-Boat Flooring

What is EVA foam boat flooring?

EVA foam marine flooring is a durable, anti-slip, waterproof, and UV-resistant surface for boats, perfect for fishing boats, pontoons, and yachts.

Why choose EVA foam over traditional boat flooring?

✅ Easy to clean
✅ Mold and mildew resistant
✅ Non-slip even when wet
✅ UV-protected surface stays cooler under the sun

Is EVA foam flooring waterproof and anti-UV?

Yes! It's closed-cell waterproof and includes anti-UV additives to prevent fading and heat absorption.

How do I install EVA foam boat flooring?

Peel-and-stick backing makes DIY installation simple—just clean, peel, align, and press. No glue or special tools required.

How do you clean EVA foam flooring?

Rinse with fresh water. Use mild soap if needed. Avoid strong chemicals and high-pressure washing.

What patterns and colors do you offer?

Dozens of designs including faux teak, diamond pattern, camo grooves, and solid brushed finishes to match any boat style.

Is EVA foam durable for marine use?

Designed for harsh marine environments, it's resistant to saltwater, UV rays, and everyday wear. Perfect for long-lasting, comfortable boat decking.

5 stars: 1395 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

3M Eva Foam Boat Decking Aluminum Pontoon Boat Decking

Having tried MarineMat in the past, I find this waterproof material to provide better shock absorbing and value. It was simple to hose it off and the eva foam bass boat flooring ensures it stays put even when the deck is wet. It was simple to clean and the boat floor ensures it stays put even when the deck is wet. I installed this best flooring for boats on my camper steps and appreciate how the camouflage boat flooring delivers a shock absorbing underfoot. The foam marine decking offers a durable surface that is fake teak decking and boat flooring near me even under harsh sun.

Great choice high quality material and sticks great

Great material and sticks really good make sure to have a good cut out ready to be installed before you start it will stick and not come up very easy

Great choice high quality material and sticks great

Great material and sticks really good make sure to have a good cut out ready to be installed before you start it will stick and not come up very easy

Not just for boats.

Love this product, easy to use and has a lot more applications then just for a boat. I have used it on my bronco and a cooler that I keep in the back when I have the top off. Keep the lid of it much cooler. You can cut with a mat knife or scissors, the glue holds up in direct sunlight without any issues, and the material does not tear easily. Has lots of options for patterns and colors, and matched my bronco color better than I thought. I used it to protect the paint on my back door and the D pillar, and looks amazing while doing it.

Not just for boats.

Love this product, easy to use and has a lot more applications then just for a boat. I have used it on my bronco and a cooler that I keep in the back when I have the top off. Keep the lid of it much cooler. You can cut with a mat knife or scissors, the glue holds up in direct sunlight without any issues, and the material does not tear easily. Has lots of options for patterns and colors, and matched my bronco color better than I thought. I used it to protect the paint on my back door and the D pillar, and looks amazing while doing it.

Would purchase again

Chose this to freshen up a Grizzly 1448 and we are super happy with it so far. Put it in 3 months ago and its rock solid. We took care to properly prep the surfaces with sanding and cleaning with acetone before applying the Eva. Feels like a new boat.

Would purchase again

Chose this to freshen up a Grizzly 1448 and we are super happy with it so far. Put it in 3 months ago and its rock solid. We took care to properly prep the surfaces with sanding and cleaning with acetone before applying the Eva. Feels like a new boat.

Solid But Flexible Foam for Waterproof Covering

Let me start off by saying I got this boat flooring foam not to actually put on a boat, but as part of my window AC weatherizing strategy. The elegant gray foam has a generous thickness while still being flexible enough to conform to the outside of my window, and the sticky backing holds the foam in place without any extra security needed. We have had several torrential rain storms already this summer but this foam flooring has kept the inside of my house completely dry. I used utility scissors to cut the foam to size - it's a bit too thick for regular scissors - but the backing comes off easily and the roll goes much further than I thought it would. This will definitely be a recurring tool in my AC weatherizing toolkit.

Solid But Flexible Foam for Waterproof Covering

Let me start off by saying I got this boat flooring foam not to actually put on a boat, but as part of my window AC weatherizing strategy. The elegant gray foam has a generous thickness while still being flexible enough to conform to the outside of my window, and the sticky backing holds the foam in place without any extra security needed. We have had several torrential rain storms already this summer but this foam flooring has kept the inside of my house completely dry. I used utility scissors to cut the foam to size - it's a bit too thick for regular scissors - but the backing comes off easily and the roll goes much further than I thought it would. This will definitely be a recurring tool in my AC weatherizing toolkit.

Great Product for the Price very happy

Why did you pick this product vs others?:This Is great stuff nice to work with. A+++nice up Grade

Great Product for the Price very happy

Why did you pick this product vs others?:This Is great stuff nice to work with. A+++nice up Grade

Works great on my Hobie Cat!

Bought this to cover the side rails of my Hobie Cat 16 (and atop the stern of the hulls behind the trampoline). Much more economical than the rail kits, you get much more material and more varieties are available than the kits. Nice grip in the water. Seems just as durable as other neoprene kits (you want soft, and supple for grip rather than firm for durability) ... Only issue is that in this case where it is applied to a curved surface, some of the edges benefit from a touch of additional contact cement to ensure they don't lift (Interestingly I wrapped from the top of the rail -- starting at the edge of the trampoline -- and that edge adhered well from the start, but as it wrapped around the rail, the bottom was the edge that seemed to benefit from additional adhesive ... maybe because it didn't benefit from warming in the sun as much.)

Worth the money

Looks very nice . And easy to use. Sticks well

Works great on my Hobie Cat!

Bought this to cover the side rails of my Hobie Cat 16 (and atop the stern of the hulls behind the trampoline). Much more economical than the rail kits, you get much more material and more varieties are available than the kits. Nice grip in the water. Seems just as durable as other neoprene kits (you want soft, and supple for grip rather than firm for durability) ... Only issue is that in this case where it is applied to a curved surface, some of the edges benefit from a touch of additional contact cement to ensure they don't lift (Interestingly I wrapped from the top of the rail -- starting at the edge of the trampoline -- and that edge adhered well from the start, but as it wrapped around the rail, the bottom was the edge that seemed to benefit from additional adhesive ... maybe because it didn't benefit from warming in the sun as much.)

Worth the money

Looks very nice . And easy to use. Sticks well

Great quality marine foam pad with super clear instructions !

I got this for my small fishing boat to replace the old, worn-out carpet, and honestly I am impressed. The foam feels durable but soft underfoot, perfect for barefoot days out on the lake. Its also not slippery when wet, which is a big plus when I am reeling in a catch or the kids are climbing in and out with wet feet.One thing that really stood out was how detailed and user-friendly the instructions were. Its not just a list of steps-they actually walk you through surface prep, cutting tips, and even how to re-stick it if it ever starts peeling. The tips about not using it near fuel tanks or on uneven surfaces were really helpful and felt like advice from someone whos actually used this stuff on a real boat.Cutting and laying it took about an hour for our deck(I used a utility knife and a long metal ruler), and the backing peeled off clean. The adhesive was strong right away, but the manual says to wait 24 hours to let it fully bond- and I followed that just to be safe. Its been a few weeks now and its still holding up perfectly, even through some rainy afternoons and muddy shoes.

Totally Impressed

We took our Carin Terrier, Phoebe, out for her first kayak a couple weeks ago. She really enjoyed sitting on the front deck where she could see everything. That is until her claws lost traction on the plastic and she took a plunge in the lake. From then on, she has insisted on being a lap dog. So I ordered this boat flooring to make a pup perch that she could grip more easily. The color matched my kayak perfectly. I made the surface of the platform out of used plywood that I had around. I sanded it a bit and blew it off with an air compressor before I stuck down the EVA foam flooring. It seemed to really adhere well. Since my dog platform was about 21 inches wide and the EVA foam was 16 inches, I had to splice on an additional width from the length I cut off. The flooring is designed to do this (meaning it had a groove on the one edge that would match with the ridge on the opposite edge). It looks great from a distance but careful examination shows that the joint is not perfect. I used a

Black & Decker rotary cutter

to trim the edges of the foam flush with the edge of the plywood after it was stuck down. This worked great and made the job so much quicker and easier than trying to use some sort of blade. This foam will be so much safer and more comfortable for Phoebe to enjoy her next kayak ride.