เพชร

Looks great! Needed a little weight on it to get it stuck solid but it'll work!

Its very stylish comfortable and pretty durable. The adhesive is starting to unstick after a year

Perfect for my SxS roof

Easy to put on hard to take off, looks good though??

I used it for a roof liner in my rzr. I'm sure alot of people buy it for that. Seems sturdy. Added spray glue for extra adhesion. I know if it comes Foo that roof is totaled lol. Can't get real good pics for the lights

You get what you pay for and some. Its waaay cheaper than the seadek, its easy to cut with an exacto knife. Online i found people use thick visqueen to lay over and draw a template to trace. Make sure you use alcohol to rub the area clean of any wax or anything else prior to installing. They make a cutter that cuts at an angle which I was able to do freehand but use fresh blades and keep moving when you do it. I've done flooring all my life so mine looked nice and cutting slightly at a angle with the edge top having more than the bottom makes it look nicer. People said to use 3m spray glue but I didn't. I had one edge melt some but the seller handled it and all the other pieces are fine so not sure why the one piece had issues when other pieces see even more sun.

I have a 20 foot Glastron wakeboard edition boat. It came with a carpet kit that buttoned to the floor after years of use the carpet was disgusting. I researched this product and figured why not! The product arrived promptly, and was packaged well. I unpackaged the rolls and laid them in the sun with weights on top as the instructions advise. I let them sit in the sun while I prepared the deck. I was very fortunate to have the old carpet as a template. I simply laid the carpet upside down on the backside of the product. I used a razor blade and changed blades several times in order to get a clean cut as recommended. I bought 3M adhesive spray and a small hand roller. I did one section at a time, spray the adhesive first and laying the matting down and then use the roller to work it into the deck. From start to finish with cutting, prepping and placing the product was about 3 1/2 to 4 hours to include cleanup. I am extremely happy with the end product! my advice would be to take your time making the cuts, as well as placing the matting where you want it and rolling it out.

I have used similar products to this on my various small boat projects. This arrived well rolled up. Its pliable and plenty sticky. Works well on the floor of my aluminum boat as well after cleaning. Cushy. Highly recommend for redecking projects!

Installed on my inner door of my sxs doors works great

really good

My honest opinionCuts super easy, can be routed. Sticks well on flat surface if clean properly (actually had issue with trimmed pieces sticking to concrete floor, wouldn't release easy)Certainly appears to be resistant to staining, everything just hoses right off.Time will tell regarding durability, but for a few hundred $$ to do my entire project, I'm good if it last a year.Only complaint is the rolls are not trimmed evenly. You have to trim 1-2" of the rolls edges if you need patterns to line up. It's a waste of product and if you need close to the dimensions of the roll you will be disappointed

This stuff is great for the price. Would have liked to see it a little bit wider sections but overall enjoying it. Sticky side isnt the best but I used gorilla glue spray adhesive underneath it and its holding tight. Purchased 2 of them but going to have to purchase 2-3 more just because of the width. Length wasnt an issue at all.

I expected the adhesive to be more heavy-duty. I would make sure that whatever surface you are adhering this to, that you make sure it is very clean before you do so. Once attached properly, this product seems very durable and easy to maintain with a quick spray-down. I like how big the tiles of raised surface is, and how spongy it is, has lots of grip and is satisfying to walk on, as well as making what would be a slick surface much safer. I am installing it on my outside porch stairs to help with traction in the winter, and it is easy to shovel snow off of as well.

Worked perfect for my boat

It's a very good quality and worked perfectly for what we needed to use it for. When we need to get some more for another buggy we will be ordered here again

easy to cut and apply,good quality

Installed this in my Jon boat. So far so good. Looks great! Time will tell on the durability of it.